Advertisement
Available languages
Available languages
ENGLISH
The twilight detector can automatically switch the light on or off depending on the ambient
light. The ambient temperature and humidity do not affect its operation. This is not only
convenient, but also practical as you can control the lighting only at night. It is used for road
lighting, garden lighting, etc.
SPECIFICATION
• Power source: 220-240V~
• Power frequency: 50/60Hz
• Rated current: 15A
• Ambient light: <2-100LUX (adjustable)
• Working temperature: -20~+40ºC
• Working humidity: <93%RH
• IP 44 Protection degree
INSTALLATION
• Disconnect the power.
• Remove the screw at the bottom and remove the cover (see Figure 1).
• Place the detector in the desired installation position and secure it with the screws.
• Reinstall the cover, turn on the power and test the operation.
TEST
• Turn the LUX switch counterclockwise to the moon position and switch on the power.
• When testing during the day, the detector should be covered with an opaque cloth.
• When the detector is covered with the opaque cloth, but it detects ambient light below 2
lux, the lamp will be on.
• When the fabric is removed, the lamp will automatically turn off.
• By sliding the LUX switch to the sun position, the lamp will be on if there is an ambient
light level of less than 100 lux.
NOTAS
• In front of the detector, there should be no obstacles affecting the amount of natural light
it receives.
• In front of the detector, there should be no objects swaying.
• Do not install the detector under light or in places where light can be focused on the
detector.
Wall mounted twilight switch
ENG
Advertisement
