Safety Instructions - Waves SM-106222.1 Manual

SM‐106222.1 EN
SAFETY INSTRUCTIONS
General Information
• Read these instructions carefully and keep them in a safe place.
• Only use the appliance as described in this manual.
• In case of damage caused by failure of not living up to this manual the warranty will decay
immediately. The manufacturer/importer accepts no liability for damages caused by failure
to not living up the manual, a negligent use or use not in accordance with the
requirements of this manual.
• Keep the appliance out of the reach of children.
• This appliance is not intended for use by persons (including children) when reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children unless they are aged from 8
years and above and supervised.
• Keep the appliance and its cord out of reach of children aged less than 8 years.
• Always remove the power cord and let it cool:
- Before moving the unit;
- Before the unit is stored;
- Before you go mounting or dismantle parts;
- Before cleaning or maintenance work;
- After use.
• Only have the appliance repaired by a qualified service centre.
• Qualified service center: after‐sales service of the manufacturer/importer, which is
qualified to carry out repair to avoid any kind of danger. In case of problems please return
the appliance to this service.
Electricity and heat
• Before use, check that the mains power supply voltage is the same and the voltage is the
same as the voltage indicated on the appliance.
• Always plug the appliance into an earthed plug socket.
• Regularly check the power cord for damage.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard.
• Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to manufacturer
or the nearest authorized service agent for examination, repair or electrical or mechanical
adjustment.
• To remove the plug from the plug socket, pull the plug. Do not pull the power cord.
• Make sure the power cord does not come into contact with hot surfaces or steam.
• Always remove the plug from the plug socket before you move the appliance.
1