Mazda MX-5 2021 Manual page 38

Child-Restraint System Suitability for Various Seat
(Mexico)
Provided information in the table shows your child-restraint system suitability for various
seating position. For installation suitability of other manufacturer child-restraint system,
carefully consult the manufacturer's instructions which accompany the child-restraint
system.
When installing a child-restraint system, the following points must be observed:
When installing a child-restraint system to the passenger seat, adjust the seat slide position

as far back as possible.
Refer to Adjusting the Passenger's Seat on page 2-10.
When it is difficult to install a child-restraint system to the passenger seat, or the seat belt

cannot be secured to the child-restraint system, perform the following operations to adjust
the seat holding the child-restraint system so that the seat belt can be secured completely
to it.
Move the seat forward or back.

Move the seatback forward or back.

An i-Size child-restraint system refers to a child-restraint system which has acquired

i-Size category certification for the UN-R 129 regulation.
When installing a child-restraint system to the passenger seat, refer to the child-restraint
system manufacturer's instructions.
Seating position
Seating position suitable for univer‐
sal belted (Yes/No)
i-Size seating position (Yes/No)
Largest suitable rearward facing fix‐
ture (R1)
Largest suitable rearward facing fix‐
ture (R2)
Largest suitable rearward facing fix‐
ture (R2X)
Largest suitable rearward facing fix‐
ture (R3)
Largest suitable forward facing fix‐
ture (F2)
Positions Table
Airbag activated
Yes (UF)
No
No
No
No
No
No
Essential Safety Equipment
Child Restraint
Passenger
Airbag de-activated
Yes (U)
No
No
No
No
No
Yes (IUF)
2-27