Maintenance And Care; Air Suction Panels - AEG DD 9863 User Manual

Maintenance and Care

Warning! Before performing any maintenance operation, isolate the
hood from the electrical supply by switching off at the connector and
removing the connector fuse.
Or if the appliance has been connected through a plug and socket,
then the plug must be removed from the socket.

Air suction panels

Remove the perimeter air suction panels to access the grease filters.
• DD 9893
The perimeter air suction panels are attached to the cooker hood by
a series of pins and coupling springs; pull them outwards and
detach them from the fastening cable. Fig. 3
When refitting the perimeter air suction panels, ALWAYS reattach
the fastening cables.
Make sure the panels are attached to the cooker hood properly
(snap-fastened).
Fig. 3
70
x 2