Do you have a question about the 100 Series and is the answer not in the manual?
Questions and answers
Amanda Maher
May 15, 2025
I need replacement motor for upper body on the L00 along with the full wired remote assembly.
1 comments:
Mr. Anderson
May 22, 2025
You should contact customer support by calling 888-975-8243 or emailing info@lucidmattress.com to obtain replacement parts such as the upper body motor and full wired remote assembly for the Lucid 100 Series.
This answer is automatically generated
Tim Woods
February 23, 2025
Should the light go out on the power pack when plugged into the motor on a Lucid 100 series adjustable base? Serial # L100F74350630815
Tim Woods
February 23, 2025
where can I buy a motor for the head of the bed? For a Lucid 100 series adjustable base. serial # L100F74350630815
100 SERIES ADJUSTABLE BASE CONTENTS Safety & Warranty Warnings Overview & Parts List Assembly Remote Control Synchronizing Two Bases Troubleshooting Warranty...
Do not place entire weight on pectancy of the foundation and will void the head or foot sections of the bed, during warranty. reposition and entering or exiting bed. 100 SERIES ADJUSTABLE BASE OWNER'S MANUAL...
GET TO KNOW YOUR ADJUSTABLE BASE WIRED REMOTE RETAINER BAR Before beginning assembly of your 100 Series Adjustable Base, please take a moment to familiarize yourself with the parts and location of components, as explained here. If any parts or components are missing, or are different than...
STEP 5 STEP 2 Connect the remote cord into the Open the accessories box and ensure all receptacle cord on the underside of accessories are included (see pages 6-7). the base. 100 SERIES ADJUSTABLE BASE OWNER'S MANUAL...
Page 6
To install the mattress retainer bar, insert ends into holes at the foot of bed. STEP 8 To complete assembly, plug the power cord into the wall outlet and use remote to test functionality. 100 SERIES ADJUSTABLE BASE OWNER'S MANUAL...
FOOT arrows raise and lower the foot section of the base HEAD and FOOT arrows simultaneously HEAD AND FOOT raise and lower the head and foot section HEAD AND FOOT of the base CONTROL (Raise) CONTROL (Lower) 100 SERIES ADJUSTABLE BASE OWNER'S MANUAL...
Using the splitter cable (included with Twin XL bases only) plug both cables into each base (A & B). Finish by attaching the last cord to one remote. The bases should now be controlled by one remote. 100 SERIES ADJUSTABLE BASE OWNER'S MANUAL...
Head section may be too close to the wall. The remote will not operate the base. Check to ensure that the remote control is secured completely and that the power cord is plugged into the wall outlet. 100 SERIES ADJUSTABLE BASE OWNER'S MANUAL...
At the sole discretion and direction of the manu- YEARS 2-5: facturer, parts demonstrated to be defective must During the years two (2) through five (5) LUCID® be returned. The manufacturer will arrange all will offer replacement parts for any mechanical return shipping.
Need help?
Do you have a question about the 100 Series and is the answer not in the manual?
Questions and answers
I need replacement motor for upper body on the L00 along with the full wired remote assembly.
You should contact customer support by calling 888-975-8243 or emailing info@lucidmattress.com to obtain replacement parts such as the upper body motor and full wired remote assembly for the Lucid 100 Series.
This answer is automatically generated
Should the light go out on the power pack when plugged into the motor on a Lucid 100 series adjustable base? Serial # L100F74350630815
where can I buy a motor for the head of the bed? For a Lucid 100 series adjustable base. serial # L100F74350630815