Space Seating 15-37A720D Operating Instructions

CHAISE DESSINATEUR BIG MAN'S
ÉTAPE 1 ÉTAPE 2
1
2
x5
ÉTAPE 4 ÉTAPE 5
10
8
x4
9
4
5
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier les quantités des pièces.
ÉTAPE 1 Insérer les cinq roulettes (2) dans la base (1). Pousser fermement jusqu'à ce que les roulettes (2) s'encliquettent.
ÉTAPE 2 Glisser le vérin pneumatique (3) à travers le repose-pied (6) et dans la base (1).
ÉTAPE 3 Fixer la repose-pied (6) au vérin pneumatique (3) en utilisant les boutons (7). SERRER LES BOUTONS (7).
ÉTAPE 4 Fixer le support du dossier (9) au coussin du siège avec plaque du siège (4) avec quatre vis (8).
RESSERRER COMPLÈTEMENT TOUTES LES VIS (8) AVEC LA CLÉ ALLEN (10).
ÉTAPE 5 Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
ATTENTION: AVANT D'UTILISER LE FAUTEUIL, S'ASSURER D'AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.
15-37A720D
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
7
3
6
1
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Roulettes . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3. Vérin pneumatique . . . . . . . . . . . . . . . . . . .1
4. Coussin du siège avec plaque du siège . . .1
5. Dossier . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
6. Repose-pied . . . . . . . . . . . . . . . . . . . . . . . .1
7. Bouton . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
8. Vis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
9. Support du dossier (préinstallé) . . . . . . . . .1
10. Clé allen . . . . . . . . . . . . . . . . . . . . . . . . . . .1
3
© Office Star Products septembre 2015
3
6
1
2
QTÉ
SPACE LIMITED WARRANTY
SPACE® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 300 lbs.
or less. The 63-37A773HM, 75-7A773, 75-37A773, 75-47A773 and 839-11B35WA are for persons weighing 400 lbs. or less, the 818 & select 829's with self-
adjusting mechanism are 300 lbs. or less and the 15-37A720D is 325 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse,
negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover
cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting
from use of this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric is warranted for one year. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
All Space chairs meet or exceed ANSI BIFMA standards.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
15-37A720D
BIG MAN'S DRAFTING CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1) up. To
lower seat height sit on chair and lift lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• FOOTRING HEIGHT ADJUSTMENT
To adjust footring height, loosen knobs (2 & 3), adjust footring to
desired height and tighten knobs (2 & 3) completely to secure
footring into position.
WARNING
1. Use this product only one person at a time.
3
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.