Getting Started; Activating The Remote Control - Yamaha RAV-2000 Owner's Manual

Getting started

1. Activating the Remote Control

Turning on the display
Tap the screen gently with your finger or a blunt, soft object like a pencil eraser.
The display is activated and the Home menu appears.
Notes · If the display stays blank or becomes black, adjust the contrast dial on the left side.
· If another panel is displayed, tap the Home button.
· The Remote Control shuts down automatically.
Using the backlight
Press the backlight button on the left side.
The backlight shuts off after a few seconds to save power.
Note In the settings, you can choose to activate the backlight automatically when you turn on the
Remote Control.
Activating Modes
The Remote Control has different modes.
When controlling devices, the Remote Control should be set to Use mode. If a label
(like or
information or switching your Remote Control to Use mode.
4
) appears at the top center of the touch screen, see page 17 for