Faq - Yamaha RAV-2000 Owner's Manual

FAQ

Can I program a button to execute more than one command?
No, you can't. However, you can create a macro to execute a sequence of commands.
How do I program source switching?
See "Learning device actions" on page 19.
How can I edit, label or delete buttons on home panels?
You can do this via the Device menu items. All changes you make to these items are
automatically updated in the Home menu.
How do I reset the Remote Control?
Normally, you never have to reset the Remote Control. However, if the Remote Control's
display freezes or if you notice unusual behavior, you might need to reset. You will not lose
any saved programmed commands or macros.
Carefully press the reset button on the back of the Remote Control with a
paperclip or sharp pencil.
The Remote Control restarts and beeps to indicate it is ready for use.
How do I revert to the original configuration?
Reverting to the original configuration restores the Remote Control's devices and commands
to its state when you purchased it. This means that all programming is lost permanently.
Normally, you never have to revert the Remote Control.
1 Touch and hold the Remote Control icon for a few seconds.
The first setup panel appears.
2 Scroll to the second setup panel.
3 Tap the Revert button.
4 Tap Revert to confirm the action.
Appendix
35