Advertisement
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
The solar-powered, self-darkening welding helmet is suitable for most welding applications. The
switching time of this helmet automatically darkens the lens as soon as you start welding. No matter
what shade the filter is set to, UV/IR protection is always present.
Safety instructions
Caution!
•
It is your responsibility to protect yourself and others from the hazards of welding.
•
Never weld without eye protection.
•
Always work with the correct work protection material.
•
Not suitable for laser and oxyacetylene welding!
•
The welding helmet does not protect against explosive or corrosive media.
•
The welding helmet does not protect against heavy force, including cut-off grinders.
•
Never place this helmet on a hot surface, as this may damage the filter.
•
This welding helmet meets most safety standards for safe welding. Only trained welders should
use this product. Safe use of this product requires proper safety training. Do not use it without
protective shields or filters. Do not use if any part of the helmet is cracked or broken. Only use it
in normal temperatures.
•
Caution!
Do not weld with this helmet when working in direct sunlight, this may cause the glare
control to malfunction.
•
Caution!
When you stop using the welding helmet, put it away so that the field of vision is
protected from dust, dirt, moisture and water. Turn the light/dark adjustment knob to "L."
•
You must not carry out laser welding with this welding helmet.
•
Do not dismantle or attempt to repair the filter!
•
The filter is not protected against impacts, blows, etc.
•
Do not use the helmet as "safety goggles" during flexing or cut-off grinding or any work other
than welding.
•
The welding helmet does not protect against explosive or flammable gases! Do not make any
modifications to the helmet, this can lead to serious injuries!
•
Do not immerse the filter or complete helmet in water! Do not use aggressive cleaning agents to
clean the filter.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62600, 62602
⁄
1
s
30,000
Page 3
06 2021-1
Advertisement
