Sunbeam 903 Important Safety Instructions

XXL Heating Pad with XpressHeat Technology
IMPORTANT SAFETY INSTRUCTIONS
DO NOT DESTROY
DANGER:
TO REDUCE RISKS OF BURNS, ELECTRIC
SHOCK, FIRE, AND PERSONAL INJURY, THIS PRODUCT
MUST BE USED IN ACCORDANCE WITH THE FOLLOWING
INSTRUCTIONS:
1. READ ALL INSTRUCTIONS.
2. DO NOT USE WHILE SLEEPING.
3. DO NOT USE ON AN INFANT OR ON AN ANIMAL.
4. THIS PAD IS NOT TO BE USED ON OR BY AN INVALID,
A SLEEPING OR UNCONSCIOUS PERSON, A PERSON
WITH DIABETES, OR A PERSON WITH POOR BLOOD
CIRCULATION.
5. DO NOT USE ON AREAS OF INSENSITIVE SKIN.
6. BURNS CAN OCCUR REGARDLESS OF CONTROL SETTING.
CHECK SKIN UNDER PAD FREQUENTLY.
7. DO NOT USE IN AN OXYGEN ATMOSPHERE.
8. DO NOT USE PINS OR OTHER METALLIC MEANS TO
FASTEN THIS PAD IN PLACE.
9. DO NOT BUNCH, SIT ON OR AGAINST OR CRUSH PAD-
AVOID SHARP FOLDS.
10. NEVER PULL THIS PAD BY THE SUPPLY CORD.
11. DO NOT USE THE CORD AS A HANDLE.
12. NEVER USE PAD WITHOUT COVER IN PLACE.
13. CAREFULLY EXAMINE INNER COVER BEFORE EACH USE.
DISCARD THE PAD IF INNER COVERING SHOWS ANY SIGN
OF DETERIORATION.
14. THIS UNIT SHOULD NOT BE USED BY CHILDREN WITHOUT
ADULT SUPERVISION.
15. PLACE PAD ON TOP OF AND NOT UNDER THE PART OF
THE BODY NEEDING HEAT.
16. USE THIS PAD ONLY ON A 110-120 VOLT AC CIRCUIT.
UNPLUG WHEN NOT IN USE. DO NOT USE WITH
GENERATORS, POWER CONVERTERS, OR INVERTERS.
17. DO NOT TAMPER WITH THIS PAD IN ANY WAY.
18. THERE ARE NO USER-SERVICEABLE PARTS. IF FOR ANY
REASON THIS PAD DOES NOT FUNCTION SATISFACTORILY,
SEE WARRANTY FOR CONSUMER SERVICE INFORMATION.
19. DO NOT USE THIS PAD WITH LINIMENT, SALVE OR
OINTMENT PREPARATIONS, ESPECIALLY ONES THAT
CONTAIN HEAT-PRODUCING INGREDIENTS. SKIN BURNS
COULD RESULT.
20. DO NOT BEND OR PINCH CORD AND DO NOT USE IF CORD
IS DAMAGED.
21. NEVER LEAVE THE APPLIANCE UNATTENDED, ESPECIALLY
IF CHILDREN ARE PRESENT.
22. LOOP CORD LOOSELY WHEN STORING. TIGHT WRAPPING
MAY DAMAGE CORD AND INTERNAL PARTS.
23. WHEN NOT IN USE, STORE THE HEATING PAD IN THE
ORIGINAL PACKAGING, IN A DARK, COOL, DRY PLACE.
24. SAVE THESE INSTRUCTIONS.
THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN
THE OTHER). TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS
INTENDED TO FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG
DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL
DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THE
PROPER OUTLET.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
© 2019 Sunbeam Products, Inc. All rights reserved. Distributed by Sunbeam Products, Inc., 2381 NW Executive Center Drive, Boca Raton,
Florida 33431. Sunbeam Products, Inc. is a subsidiary of Newell Brands Inc. (NYSE: NWL).
Printed in China. GCDS-SUN599004-JC
www.sunbeam.com
903_XXL Xpress Heat_19ESM1.indd 1
Model: 903
HOW TO USE YOUR HEATING PAD
1. Lay the Machine Washable Cover on a flat surface.
Insert the vinyl pad into the cover, making sure the
cord and controller remain on the outside of the
cover.
WARNING: Never use the heating
pad without the fabric cover.
2. Plug into any 120V AC electrical outlet.
Your Sunbeam XpressHeat
®
unique fast-heat technology in which you will feel
heat in 30 seconds - for faster pain relief!
3. To turn the pad on, press the Power Button (Figure 1).
Then select from 6 heat settings by scrolling to the
desired setting with HEAT▲ or HEAT▼ buttons. The light ring around the controls,
called the Heat Meter, will light up one side at the time, indicating progress as
the pad heats up. All four sides of the Heat Meter will light up within 30 seconds
of powering up, indicating that the heating pad is warm and ready for use.
4. To turn the pad OFF, press the Power Button one more time. The
heating pad and lights of the Heat Meter will turn off.
WARNING: DO NOT SIT ON OR AGAINST OR CRUSH
PAD – AVOID FOLDING DURING USE.
DO NOT USE WHILE SLEEPING.
5. SEE ADDITIONAL WARNINGS.
AUTO-OFF FEATURE
Your heating pad controller includes a selectable Auto-Off feature. By pressing the
"Auto Off" button, you can set the timer to "Stay On" continuously or to shut down
after 2 hours of continuous use. NOTE: After a power outage, the Auto-Off feature
automatically resets the timer.
USING MOIST HEAT THERAPY
In some cases, you may find that moist heat therapy provides
more comfort and relief. When using moist heat therapy, you
should protect furniture and clothing from becoming damp.
1. Dampen either side of the heating pad with water by
patting the surface with a wet sponge or cloth or use
a spray bottle to apply a fine mist. Do not thoroughly
soak pad. Do not spray cord with water. (Figure 2)
DANGER: Do not immerse the pad or wiring in water or place
under running water. Failure to comply may result in product
failure and/or personal injury.
FABRIC COVER WASHING INSTRUCTIONS
CAUTION: DO NOT DRY CLEAN! DO NOT BLEACH! DO NOT USE WRINGER!
1. Disconnect pad from outlet.
2. Remove cover from pad.
3. Machine or hand wash; use mild detergent. Wash with cool water only.
4. Hang to dry or machine dry on gentle, air dry cycle.
5. Instructions above are for cover only. Do not wash
inner pad, wipe with a damp cloth if needed.
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing
business as Jarden Consumer Solutions (collectively "JCS") warrants that for a period of five years from the date of purchase, this
product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component
of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or
component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is
your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void
this warranty. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep
the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores
selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty. This warranty
does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on
improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS
or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.
What are the limits on JCS's Liability?
JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty
or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a
particular purpose is limited in duration to the duration of the above warranty.
JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. JCS shall not be liable for
any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special,
consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought
against purchaser by any other party. Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to
you. This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to
state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
In the U.S.A. - If you have any question regarding this warranty or would like to obtain warranty service, please call
1-800-435-1250 and a convenient service center address will be provided to you.
In Canada, - If you have any question regarding this warranty or would like to obtain warranty service, please call
1-800-435-1250 and a convenient service center address will be provided to you.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton,
Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer
Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or claim in connection with this
product, please write our Consumer Service Department.
PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
For inquiries regarding recycling and proper disposal of this product, please contact your local waste management facility.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This product has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This product generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception, which can be determined by turning the
product off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
PN: 188530-2
A. Display
B. Power Button
C. Auto Off Button
D. Auto Off Indicator
E. Heat Meter
F. Heat Setting
heating pad features a
®
Buttons
Figure 1
5-YEAR LIMITED WARRANTY
FCC CERTIFIED
A
E
B
C
F
D
Figure 2
4/15/19 16:18