Advertisement
4. "UV-C/SLEEP" BUTTON:
First press this button to turn on the UV lamp.
Second press it to turn on the Sleep mode.
Third to turn off the UV lamp.
Forth to turn off the Sleep mode.
Sleep Mode: Under the mode, the unit is working but the LED dims.
Important note: When the unit is not in use, switch it off and unplug it.
INSTALLING & REMOVING FILTERS
FILTER REPLACE INDICATOR
The FILTER RESET light flickering continuously indicates that it is time to replace
the filter. Replace the filter according to the directions then press the POWER button
and hold for 5 seconds to restart the system. The light will stop flickering.
1. Open the front cover from the top.
2. Remove the combination filter by pull the two strips.
3. Insert a new Combination Filter into the unit. Consult the strips on the filter for
correct installation direction.
4. Re-attach the front cover of the unit and securely latch into place.
5. Press and hold POWER Button for 5 seconds to reset Filter Change Indicator.
CLEANING & MAINTAINING
THE COMBINATION FILTER
The air purifier should be cleaned at least once every month by a clean, dry, soft cloth.
More frequent cleaning may be required depending on environmental conditions.
6
Advertisement
