Advertisement
Advertisement
Table of Contents
Related Manuals for OION Technologies Enerzen O-555
Summary of Contents for OION Technologies Enerzen O-555
- Page 1 O-555/O-777 Commercial Air Purifier...
- Page 2 OWNER’S MANUAL Please read all of the information provided in this owner’s manual before operating your new Enerzen commercial purifier.
- Page 3 CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN ATTENTION CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVCE PERSONNEL. This “bolt of lightning” indicates that uninsulated material within your unit may cause an electrical shock.
- Page 4 Read ALL instructions carefully before using this product. Model: O-555/O-777 Rated Voltage: USA/Japan AC 100-120V/50-60Hz Power Consumption: 60 W Ceramic Plate Size(1plate): 90X50MM Air Volume: Max 100 CFM(2.8 M /min) Sound Level(DB): 35 Db Product size(mm): W178xH148xD205MM Weight: 2.24Kgs(4.9Lbs)
- Page 5 Operating the Commercial Purifier (Front View) Timer Control Knob Turn clockwise to set the timer for timed operation up hours. Indicator Light Illuminates when the unit is in operation.
- Page 6 (Back View) Fuse Holder Houses removable fuse. (Spare fuse included, 1 amp, 0.79 inch in length) Power Cord 100~120 Volt grounded cord...
- Page 7 The Enerzen Commercial Ozone Generator and Air Purifier is designed to remove odors in unoccupied spaces. The unit has a timer that will enable it to run for a maximum duration of 2 hours. The timer will then shut the unit off. You should allow 40-60 minutes before returning to the treated area.
- Page 8 When the air purifier no longer produces enough ozone to be effective, the ozone plate should be replaced. How to replace a plate: 1) Turn the unit off and unplug from outlet. 2) Use a screw driver to unfasten cover screw and remove cover.
- Page 9 If you suspect a problem with your unit check the following: 1) Unit is plugged in properly. 2) It’s important that the air purifier be properly grounded to avoid potential shock. 3) Fuse is installed properly and in good condition. To replace fuse, pull out the plastic fuse holder, remove old fuse and insert new fuse.
- Page 10 Warranty Information OION Technologies, LLC (collectively “OION”) warrants from the date of purchase, this product will be free from defects in material and workmanship. Please refer to your retailer’s product sales page for the duration of the warranty period. OION, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period.
Need help?
Do you have a question about the Enerzen O-555 and is the answer not in the manual?
Questions and answers
My 0-555 ozone’s **** is working but it’s not purifying air. Seems the plate isn’t workings. I replaced the plate and no change…
If the OION Technologies Enerzen O-555 is not purifying air even after replacing the plate, check the following:
1) Ensure the unit is properly plugged in.
2) Verify that the air purifier is properly grounded to avoid electrical issues.
3) Check if the fuse is installed correctly and in good condition. If needed, replace it with a 1-amp (0.79-inch) fuse.
If the issue persists, there may be a problem with the ozone generator module or another internal component.
This answer is automatically generated