Download Print this page

Flightcom 4DX CLASSIC User Manual

Advertisement

Quick Links

MAINTENANCE
Care and Maintenance
• Inspect ear seals and mic muff frequently for wear. Replace at 6 month intervals.
If you see any defect such as holes or cracks in the ear domes, ear seals, or
headband, headset should be immediately repaired or replaced.
• Do not remove the foam speaker cover.
• To ensure proper function, keep the microphone away from excessive moisture.
Do not store headset in high temperature environments or direct sunlight.
• Wipe headset and ear seals with a mild soap and water mixture only. The foam
mic muff may be removed and cleaned in a mild detergent, or replaced by
ordering from Flightcom.
Never immerse any part of the Headset in water.
To Order Flightcom Accessories:
Call: 1-800-432-4342
Flightcom Corporation
17600 SW 65th Ave, Lake Oswego, OR 97035 USA
800-432-4342 · sales@flightcom.net · flightcom.net
Copyright © 2020 Flightcom Corporation. All rights reserved.
Flightcom is a registered trademark of Flightcom Corporation.
Specifications subject to change without notice.
600-0030-00 Rev H
WARNING
4DX CLASSIC
USERS GUIDE

Advertisement

loading
Need help?

Need help?

Do you have a question about the 4DX CLASSIC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Flightcom 4DX CLASSIC

  • Page 1 Flightcom Corporation 17600 SW 65th Ave, Lake Oswego, OR 97035 USA 800-432-4342 · sales@flightcom.net · flightcom.net Copyright © 2020 Flightcom Corporation. All rights reserved. Flightcom is a registered trademark of Flightcom Corporation. Specifications subject to change without notice. 600-0030-00 Rev H...
  • Page 2 INSTALLATION HEADSET FEATURES Insert the larger plug into the jack marked “headphone” or “phone”. • Passive noise reduction by 24db • Insert the smaller plug into the jack marked “microphone” or “mic”. • Stereo/mono switchable • Set the stereo/mono switch on the cable splitter box to the “M” position. If •...