Pride T3 Owner's Manual page 11

LIFT CHAIR SERIES
III. YOUR LIFT CHAIR
The external transformer will also come equipped with mounting brackets that allow the transformer to be
mounted to the wall directly under the standard electrical outlet. The screws must be mounted to the wall stud
for security. Refer to "Appendix B" for a mounting diagram.
NOTE: Pride is not responsible for damage due to improper installation.
Batteries: Provide the power needed to return the lift chair to an upright or semi-upright position in the event
of a power failure. For those models equipped with a battery backup system, the batteries (not included) must
be installed into the external transformer. See IV. "Assembly/Disassembly."
NOTE: The batteries will provide power for only a short period of time after power is removed from
the system, so it is important to act quickly in the event of a power failure. Press and hold the STAND
button on the hand control as soon as possible. Maintain a steady pressure on the button to avoid
excessive draw from the battery and achieve the most amount of lift. Keep in mind that the amount of
lift the batteries will be able to provide is affected by user weight and battery condition.
Hand Control: Contains the controls needed to operate the various functions of the lift chair. Refer to V.
"Operation" for more information. The hand control is equipped with a quick-release connector, which
enables the user to detach the hand control from the chair, disabling all functions of the hand control.
Lift Chair Series www.pridemobility.com 11