Page 3
Optional: Mill an additional circular pocket with a dia- meter of min. 45 mm and a depth of 2 - 3 mm. This allows the Lifting Anchor Mini to be flush with the top edge of the wood. Remove chips thoroughly.
Page 7
Connection in the Connector β with two strands 30° 45° 60° Side area Lifting Anchor Mini Ø 40 mm + 8 x VSS 6 x 60 75° β with n strands 90° n x 183 Glue-laminated timber wall Stop bracket...
Page 9
Connector β with two strands 30° 45° 60° End grain area Lifting Anchor Mini Ø 40 mm + 8 x VSS 6 x 60 75° β with n strands 90° n x 166 Horizontal CLT wall or beam Vertical CLT wall or beam Notes: ·...
Page 10
Connection in the Connector β with two strands 30° 45° 60° Side area Lifting Anchor Mini Ø 40 mm + 8 x VSS 6 x 60 75° β with n strands 90° n x 464 Glue-laminated timber wall Stop bracket...
Page 12
Connection in the Connector β with two strands 30° 45° 60° Narrow surface Lifting Anchor Mini Ø 40 mm + 8 x VSS 6 x 60 75° 1196 β with n strands 90° n x 688 Horizontal CLT wall or beam...
Need help?
Do you have a question about the LIFTING ANCHOR MINI and is the answer not in the manual?
Questions and answers