LG AHU EEV KIT Installation Manual page 3

• Failure to carefully read and follow all instructions in this
manual can result in equipment malfunction, property
damage, personal injury and/or death.
Installation
• Don't use a power cord, a plug or a loose socket which is
damaged.
- Otherwise, it may cause a fire or electrical shock.
• For electrical work, contact the dealer, seller, a qualified
electrician, or an Authorized Service Center.
- Do not disassemble or repair the product. There is risk of fire
or electric shock.
• Always ground the product.
- There is risk of fire or electric shock.
• Install the panel and the cover of control box securely.
- There is risk of fire or electric shock.
• Use the correctly rated breaker or fuse.
- There is risk of fire or electric shock.
• Do not modify or extend the power cable.
- There is risk of fire or electric shock.
• Do not let the air conditioner run for a long time when the
humidity is very high and a door or a window is left open.
- Moisture may condense and wet or damage furniture.
• Be cautious when unpacking and installing the product.
- Sharp edges could cause injury. Be especially careful of the
case edges and the fins on the condenser and evaporator.
• You need to use a safely insulated power supply which
follows IEC61558-2-6 and NEC Class2.
- If you do not follow, It may cause fire, electric shock,
explosion or injury.
• Securely attach the electrical part cover to EEV Controller
Module.
- If the electric part cover of EEV Controller Module is not
attached securely, it could result in a fire or electric shock
due to dust, water, etc.
IMPORTANT SAFETY INSTRUCTIONS
3