Related Manuals for Starke sound AD4.320
Summary of Contents for Starke sound AD4.320
- Page 1 User Guide AD4.320 Starke Sound Inc. 17810 S.Main St., Suite B, Gardena, CA 90248 ! starkesound.com...
- Page 2 Safety instructions 1) Read, follow and keep these instructions 2) Do not remove the cover as repairs require qualified technicians 3) Do not use the product near water 4) Do not install near any heat sources such as radiators, heat registers, stoves or amplifiers 5) Clean the product only with a damp cloth 6) Use care when lifting or moving this heavy product...
- Page 3 Set-up instructions For 4-channel operation, set these two switches to STD (standard). Connect your 4 input channels using either unbalanced (RCA) or balanced (XLR) cables. Channels are labeled 1, 2, 3 and 4. Set the four toggle switches to UNBAL (unbalanced) or BAL (balanced) as appropriate.
- Page 4 Connect the power cord to AC INPUT and plug the other end into a 120-volt wall socket. Set the rocker switch to ON to power-on the amplifier. Your AD4.320 can also serve as a 2-channel or 3-channel amplifier, delivering greater power to 2, or to 3 channels. This is done by “bridging.” For 2-channel operation, first, TURN OFF THE AMPLIFIER.
Need help?
Do you have a question about the AD4.320 and is the answer not in the manual?
Questions and answers