Related Manuals for Starke sound A8.350
Summary of Contents for Starke sound A8.350
- Page 1 User Guide A8.350 Starke Sound Inc. 17810 S.Main St., Suite B, Gardena, CA 90248 ! starkesound.com...
-
Page 2: Safety Instructions
Safety instructions 1) Read, follow and keep these instructions 2) Do not remove the cover as repairs require qualified technicians 3) Do not use the product near water 4) Do not install near any heat sources such as radiators, heat registers, stoves or amplifiers 5) Clean the product only with a damp cloth 6) Use care when lifting or moving this heavy product... -
Page 3: Setup Instructions
Set-up instructions Input connections Connect up to 8 input channels using either unbalanced (RCA) or balanced (XLR) cables. Channels are labeled 1A, 2A, 3A, 4A and 1B, 2B, 3B, 4B. A and B channels have separate power supplies. So, if you are connecting less than 8 channels, distribute them among A’s and B’s to take advantage of both power supplies. -
Page 4: Operation
Output connections, trigger, and power Connect up to 8 speakers using the corresponding output binding posts. Speaker wires can be terminated with “banana plugs” which are inserted, or stripped insulation (unscrew binding post cap, insert wire into hole on threaded shaft and tighten cap). Observe correct polarity (“+”... -
Page 5: Key Features
Starke Sound™ A8.350 A7 Sound Quality for 8 Channels The A8 uses the same circuit core as the acclaimed A7 Mark II, honoring the key traditions of great sound in Starke’s power amplifiers: the most linear amplified state (Class A) and a fully-balanced circuit. -
Page 6: Technical Specifications
Input Impedance (RCA) 100KΩ Input Impedance (XLR) 200KΩ Input Sensitivity 2.4V Output terminals 8 pairs of beryllium copper binding post，custom made by Starke Sound Output Impedance 0.12Ω （5 Hz to 100 kHz） Minimum load impedance 0.12Ω True balance circuit Heat...
Need help?
Do you have a question about the A8.350 and is the answer not in the manual?
Questions and answers