Related Manuals for ZowieTek 90 -980 Series
Summary of Contents for ZowieTek 90 -980 Series
- Page 1 HD PTZ Video Camera User Manual PTZ HDMI / SDI Camera PTZ NDI | HX Camera Printed in China.
-
Page 2: Table Of Contents
CONTENT 1. IMPORTANT INFORMATION ......3 2.5.1 External Interface ..........7 1.1 ATTENTIONS ................ 3 2.5.2 Bottom Dial Switch ..........7 1.1.1 Caution of Transport .......... 3 2.5.3 RS-232 Interface ..........7 1.1.2 Safety of Electricity ..........3 2.5.4 Power on Initial Configuration......8 1.1.3 Polarity of Power Supply ......... -
Page 3: Important Information
All the contents of this manual and the copyright platform, and it cannot be installed at an angle. ownership belong to Zowietek Electronics, Ltd. Without 3. If the camera is installed on TV or computer, the base the approval of the company, no one can imitate, copy, can be fixed by four double-sided adhesive trays. -
Page 4: Product Overview
2. PRODUCT OVERVIEW 2.1 WHAT’S IN THE PACKAGE Y: Network Interface 8: LAN 9: NDI Accessory 1: 12x Switching Power Adapter Z: Optical Zoom 2: 20x RS232 Cable 3: 30x User Manual Please refer to corresponding features in this manual. PTZ Quick Start Guide Remote Controller Standard... -
Page 5: Main Features
Note: 1. Users can connect external active microphone 2. Network interface for this device is LAN port and for or pick-up (3.5mm audio cable) through audio input NDI model is NDI port. Audio and video will output at interface. the same time through network interface. 2.3 MAIN FEATURES 2.3.1 Camera Performance 8. - Page 6 2. Upside-down mounting...
-
Page 7: Video Output
out PTZ control, configuration and other operations. For 2.4.2 Video Output more details, please see 4.2 Web Login. This device has video output from LAN, HDMI and 3G- 2. HDMI Video Output SDI. a. HDMI Video Cable Connection refers to No.11 in 1. -
Page 8: Power On Initial Configuration
2. RS-232 Mini-DIN 8-pin Port Definition Port Definition Data Terminal Ready Data Set Ready Transmit Data System Ground Receive Data System Ground IR Commander Signal IR OUT No Connection 3. RS232 (DB9) Port Definition as shown below: Port Definition Data Carrier Detect Receive Data Transmit Data Data Terminal Ready... -
Page 9: Application Instruction
3. APPLICATION INSTRUCTION 3.1 REMOTE CONTROLLER Keys Instruction and Application： Finishing initialization, it can receive and execute the IR commands. Press the remote controller button, the indicator light is flashing; release the button, the indicator light stops flashing. Users can control the pan/ tilt/ zoom, setting and running preset positions via remote controller. - Page 10 7. Set/ Clear Preset key: Set Preset: Set a preset position, the users should press the [SET PRESET] key first and then press the number key 0-9 to set a relative preset. Clear Preset key: Clear a preset position, the user can press the [CLEAR PRESET] key first and then press the number key 0-9 to clear the relative preset.
-
Page 11: Menu Setting
3.2 MENU SETTING 3.2.1 MAIN MENU 3.2.3 CAMERA Setting Press the [MENU] key on the initial interface to display the Move the cursor to the (Camera) in the Main Menu, click ↑↓ menu and use [ ] to scroll the cursor up and down, which the [HOME] key to enter into the (Camera) setting page as point at or highlight the selected items. -
Page 12: P/T/Z Setting
IRIS Priority: OFF, F11.0, F9.6, F8.0, F6.8, F5.6, F4.8, DCI: Dynamic Contrast: OFF,1～8 F4.0, F3.4, F2.8, F2.4, F2.0, F1.8 (only available in Manual 4. FOCUS Setting and Iris priority mode) Brightness: 0~23 (only available in Brightness priority mode) 2. COLOR Setting Move the cursor to the (Focus) in the Menu, click the [HOME] key to enter into the (Focus) setting page as shown. -
Page 13: Video Format Setting
Preset speed:10 Move the cursor to the (Version) in the Main Menu, click the [HOME] and enter into the (Version) setting page as shown. 3.2.5 VIDEO FORMAT Setting MCU Version: Display MCU version information Camera Version: Display camera version information AF Version: Display the focus version information Note: Picture above is for reference only, different models of cameras have different versions. -
Page 14: Network Connection
4. NETWORK CONNECTION 4.1 CONNECTIION MODE Direct connection mode: Connect the camera and 2) Secondly, select options as picture below. Type in the computer by network cable refers to No.12 in Figure IP address, subnet mask and Default gateway found in the 2.2.3. -
Page 15: Web Login
is normal. Note: After connecting as shown above, it would be better to change the third segment of the camera IP address to be the same as the segment of the current PC IP address. For more detailed information about changing the IP segment, please refer to “IP Address”... - Page 16 1. Audio Configuration G.711A, G.711U optional) Sample Rate: set sample rate and the device will reboot automatically after change (default 48000; 16000, 32000 and 44100 optional) Sample Bits: default 16 (the parameter is only and cannot be modified) Bit Rate: set audio compressing code rate (default 64Kbps;...
- Page 17 Password for stream encryption: Flicker: set up Flicker mode, valid when status of automatic, aperture or brightness priority (default 50Hz; Crypto key length in bytes: OFF and 60Hz optional) Note: Click the “Save” button to display the “Save G.Limit: set the gain limits, auto, active when it is status successful!”...
- Page 18 According to the resolution Scale size automatically: To be turned on/ off. Master Stream OSD Font Size: (default 48; 16 and 24 optional) Slave Stream OSD Font Size: (default 48; 16 and 24 optional) Show Time: Set to show the time or not Note: Click the “Save”...
- Page 19 (Default OFF) Enable: Set whether open GB28181 IP Address: Set the IP address, save changes and reboot ClockSync: Set whether open synchronization time the device to takes effect (default 192.168.5.163). (Note: Video Type: Set the stream type (default Main Stream; This IP address is the same with the one used to login Web Sub Stream optional) page.)
- Page 20 user2 optional) Username: Set the username (Select User admin, default admin; select user1, default user1; select user2, default user2; users can modify by their own) Password: Set a password (Select User Administrator default admin; select a common user1 default user1; to select a common user 2 default user2;...
-
Page 21: Logout
4.2.4 LOGOUT Click the “Logout” bottom and pop-up “Confirmation” dialog; select “Yes” or “No”, choose “Yes” to exit the current page and “No” to return to the user login interface again. -
Page 22: Troubleshooting
5. TROUBLESHOOTING 1) No video output command window to enter ping 192.168.5.163. Press the Enter key to appear message as follows: Description a. Check whether the camera power supply is connected, network connection is normal. the voltage is normal and the power indicator is lit. b. - Page 23 streaming needs at least 3 steps: login into the camera’s web interface, get the info from the platform you want to 13) Push stream through RTSP(VLC) stream to, use the info in the right section. a. First, choose NETWORK for VLC media source. After login into the camera’s web interface, go 12) Get RTMP(S) URL to Configuration...
- Page 24 A professional video camera, streaming, recording solution provider Since 2004 Zowietek Electronics, Ltd. 2218 Hunan Road, West Wing 1701 Pudong, Shanghai 201204 PN: 9048x-980, 9049x-980 July. 2021 www.zowietek.com www.zowietek.com/documents https://www.zowietek.com/ptz-faq/ NDI® is a registered trademark of NewTek, Inc. and is authorized to Minrray...
Need help?
Do you have a question about the 90 -980 Series and is the answer not in the manual?
Questions and answers