Page 1: Table Of Contents
INSTRUCTION MANUAL ® RADIAL MICRO FILTER OLFS-29/1 OLFS-58/1 Congratulations with your purchase of this NTF® Radial Micro Offline Filter. To ensure optimum performance of this filtration system, please read this manual carefully. 1. Introduction page 2 2. General description page 2 3.
Page 2: Introduction
When filtering fuel it is highly recommended to install a water separator in the suction line. As NTF filter cartridges are hygroscopic the water content in the fuel may cause the elements to saturate prematurely.
Page 3: Operating Instructions
There are no further special requirements for transport or storage. When the OLFS unit or filter element is disposed off, the local regulations for disposing chemical waste should be taken into account. © 2017 NTF FILTER BV www.ntf-filter.com page 3 ®...
Page 4: Installation And Assembly
When the system shows leaks or any abnormal sounds, switch it off immediately. The cause should be determined and remedied before any further operation. When using the minimess connectors on the manifold, ensure that the return line is pressureless. © 2017 NTF FILTER BV www.ntf-filter.com page 4 ®...
Page 5: Maintenance Instructions
Check the oil level in the system and top up the necessary quantity, if necessary. Check if the oil runs through the filter properly. If the hoses and the filter housing warm up, the filter system operates properly. © 2017 NTF FILTER BV www.ntf-filter.com page 5 ®...
Page 6: Warranty
® filter and its positive effects for the equipment. Extended oil drain intervals are achievable with the proper use of the NTF ® system. However, the condition of the oil and the oil change intervals are also dependent upon the original equipment manufacturer, operating conditions, selection of lube/oil, and system type.
Page 7: Hydraulic Scheme
10. HYDRAULIC SCHEME © 2017 NTF FILTER BV www.ntf-filter.com page 7 ® INST-OLFS1-EN 100718-03...
Page 8: Technical Specifications Filter System
Connections for particle counter 1/8 BSP > M16X2 1/8 BSP > M16X2 Weight 21 kg 23,7 kg Dimensions (hxwxd) 500x340x190 mm 800x340x190 mm Sump volume (directive) depending on application © 2017 NTF FILTER BV www.ntf-filter.com page 8 ® INST-OLFS1-EN 100718-03...
Page 9: Technical Specifications Gear Pump
The fixing of the pump should be effected with 2 bolts type 10.9 – 12.9 pretighten at 25 ± 2 Nm. Fix the pump by self-locking nuts with tightening torque 32 ± 2 Nm © 2017 NTF FILTER BV www.ntf-filter.com page 9 ®...
Page 10: Technical Specifications Motor
13. TECHNICAL SPECIFICATIONS MOTOR © 2017 NTF FILTER BV www.ntf-filter.com page 10 ® INST-OLFS1-EN 100718-03...
Page 28: Eu Declaration Of Conformity
: 03-04-2020 Delivery date : 06-04-2020 We, NTF Filter bv, declare, under own responsibility, that this product 01-OLFS-29/1-A-220-3,2 with serial number 20190120 to which this declaration is related, complies with all appropriate regulations and is in conformity with: the standard directive 2006/42/EU of the European parliament and the Council of 17 May 2006 •...

This manual is also suitable for:

Olfs-29/1 Olfs-58/1 Olfs-29/2 Olfs-58/2

NTF OLFS Series Instruction Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NTF OLFS Series

Summary of Contents for NTF OLFS Series

This manual is also suitable for:

Table of Contents