Advertisement
Quick Links
18''
THIS MANUAL APPLIES TO THE FOLLOWING SKUs: 00301097, 00301098, 00301099, 00301327,
Keep this information for further reference.
Thank you for purchasing a NavePoint product.
Please examine the product for any damaged parts. If any part is damaged or missing, contact NavePoint for assistance. Do not
attempt to install or use product if it has been damaged. This product contains small items that could be a choking hazard – keep these
items away from children.
During installation, lay product contents on cardboard or other protective surface to avoid any damage.
Do not use with equipment that is heavier than the indicated weight capacity for this product. This product is designed to be installed
indoors on wood stud walls, solid concrete walls or brick walls. Make sure that the supporting surface will safely support the weight of
the equipment and all attached hardware and components. It is recommended that installation be performed by a qualified installer.
NavePoint cannot be held responsible for damage to equipment or personal injury resulting from improper use or installation of
product.
Maintenance: Check that the product is secure and safe to use at regular intervals (at least every three months).
Limitations of Liability: In no event will NavePoint, LLC. be liable for any damages, whether direct or indirect, special, punitive,
incidental or consequential damages (including, but not limited to, lost profits or revenue, loss of use, lost business opportunities or loss
of goodwill) or for the costs of procuring substitute products, arising out of or in connection with the use of the product, whether such
liability arises from any claim based upon contract, warranty, tort (including negligence), product liability or otherwise, whether or not
seller has been advised of the possibility of such loss or damage. In no event will seller's total cumulative liability, from all causes of
action and all theories of liability, exceed the total amounts actually paid to seller by customer under the order that gives rise to any
liability hereunder.
© 2020 NavePoint, LLC
OWNER'S MANUAL: Swing Gate Wall-Mount Rack
18'' Depth (6U/9U/12U/15U/18U)
24'' Depth (6U/9U/12U/15U/18U)
00301328, 00301329, 00301330, 00301331, 00301332, 00301333
24''
20200512-01
Advertisement
Related Manuals for NavePoint 6U
Summary of Contents for NavePoint 6U
- Page 1 Thank you for purchasing a NavePoint product. Please examine the product for any damaged parts. If any part is damaged or missing, contact NavePoint for assistance. Do not attempt to install or use product if it has been damaged. This product contains small items that could be a choking hazard – keep these items away from children.
-
Page 2: Parts Identification
Bottom Metal Sleeves(2x) Top Sleeves(2x) Equipment Mounting Hardware M6 Mounting Screws (10x) M6 Cage Nuts(10x) 12-24 Mounting Screws(10x) M6 Metal Washers M6 Wall Mounting Screws 6U/9U/12U (x4) 6U/9U/12U (x4) 15U/18U (x6) 15U/18U (x6) Tools Required: Phillips Screwdriver (not included) www.NavePoint.com customerservice@navepoint.com... -
Page 3: Rack Assembly
Insert 2 Sleeves (G) into the holes on the Horizontal Support Bar (B) on the Top side. STEP 4. Secure Equipment Mounting Frame (C) to the built frame, make sure the latch pins click into both top and bottom metal sleeves. www.NavePoint.com customerservice@navepoint.com... -
Page 4: Equipment Installation
The rack can hold up to 100 pounds evenly distributed (50 pounds when Equipment Mounting Frame is in an open position). Make sure wall surface can hold weight of the cabinet and equipment. 3. Equipment Installation 1 Rack Unit www.NavePoint.com customerservice@navepoint.com... - Page 5 2 After installing the required cage nuts, use the included M6 Mounting Screws (H) to secure your equipment into the installed M6 Cage Nuts (I). Tapped Hole Mounting Use the included 12-24 Mounting Screws (J) to secure your equipment to the Equipment Mounting Frame (C). www.NavePoint.com customerservice@navepoint.com...