Table of Contents
Advertisement
2.2
Panel-mount Installation
To mount the panel onto a wall, you will need a strong mounting surface, screws, along
with the mounting brackets.
Please take a look at the illustration below before starting to mount the panel.
Step 1: Prepare a 394 x 297.5mm opening on the surface to be mounted
Step 2: Place the rear of the panel through the opening
Step 3: Insert a screw through each of the mounts
Step 4: There is a funnel-shaped track inside each of the mount holes on the panel.
Insert each mount into the holes from the wide end of the track and push it towards
the narrow end to secure. Do this for all the mounts.
Chapter 2 – Hardware Information
螺絲套上彈簧固定在
STEP 1.
Bracket
STEP 2.Mount Bracket
Mount
裝在凸型孔內
8
Advertisement
Table of Contents
