Table of Contents
Advertisement
9020 QRB3000CA-3-ENGLISH
Installation
Removing the . . . . . . . . .
NAV ONE
Temporary removal
Transferring the
NAV ONE
Using the GPS
unit at home or
in the office
9/28/04
3:44 PM
Page 10
The NAV ONE should temporarily be removed when parking the vehicle to
prevent theft or heat damage. It may also be removed to transfer the entire
unit to a different vehicle or to use it at home or in the office to program a
trip plan using the optional Cobra indoor adapter.
To temporarily remove the NAV ONE from a vehicle:
1. Unplug the power cord from the vehicle's 12 volt power socket.
2. Pull the QUICK RELEASE lever on the back of the unit and remove the
unit to store it in a protected location or to use indoors. The suction cup
portion of the bracket can be left attached to the windshield for quick
reinstallation of the unit.
To transfer the NAV ONE to a different vehicle:
1. Unplug the power cord from the vehicle's 12 volt power socket.
2. Rotate the lock lever off the PRESS button, then pull the tab
to release the suction cup.
3. Move the unit to the other vehicle and install it as described on page 7.
To use the NAV ONE at home or in the office to program a trip plan:
1. Connect the unit to an electrical outlet using an optional Cobra
indoor adapter developed especially for use with the NAV ONE.
See accessories and order form on pages 27 – 28 for information
on ordering a Cobra adapter.
2. Turn the unit on and program the desired trip as referenced in
the trip planner section on page 15.
The suction cup portion of the bracket can
be left attached to the windshield for quick
reinstallation.
10
Advertisement
Table of Contents
