Installation - Cobra NavOne 2950 Operating Instructions Manual

Installation

Installation
The unit can be mounted to the vehicle's windshield with the included bracket and suction cup, or an
alternative mounting can be devised.
THE UNIT MUST BE FIRMLY ATTACHED TO THE VEHICLE. If it is not, it can become a projectile
hazard to vehicle occupants and possibly cause serious injury during a violent maneuver or crash.
Position the unit where it is visible at a
glance but will not obstruct the driver's
view of the road or interfere with the use
of vehicle instruments and controls.
Do not put the unit over airbag panels
or within airbag deployment envelopes.
Do not let the
mount block
the view of
the sky.
Position the unit so the antenna can "see"
the sky.
Alternative mounting
recommended for
high-pitched
windshields.
The unit should be as close to vertical as possible
and not tilted front-to-back or side-to-side.
6
View From
the Top