Table of Contents
Advertisement
Settings
Your Detector
Intro
Operation
Customer
Warranty
Assistance
Muting an Alert
Your detector allows you to quickly turn off an Audio Alert by momentarily
pressing the Program/Mute button. If you press the Program/Mute button
a second time during the Alert, the Audio Alert will be turned back on.
Secondary Icons
Program/Mute Button
Press and release
To Turn On or Off an Audio Alert Using the Program/Mute Button
Notice
Press and release
Tone
Visual Display
the Program/Mute
None
None
button.
Auto Mute Mode
Auto Mute will automatically reduce the audio volume of all alerts after four (4)
seconds for as long as the signal is detected. The factory setting for Auto Mute is on.
To Turn Auto Mute On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
Tone
Visual Display
go to Auto Mute.
Two beeps
Auto Mute On
One beep
Auto Mute Off
Auto Mute On
Auto Mute Off
AutoMute
AutoMute
On
Off
Auxiliary Audio Jack
The Auxiliary Audio Jack can be
used to connect an external speaker
in environments with high ambient
noise levels. The internal speaker
will be disconnected.
12 English
Settings
Your Detector
Intro
Operation
Customer
Assistance
IntelliMute
Main Icons
IntelliMute is a unique new feature that allows you to avoid alerts you
don't need to hear because you are stopped or moving slowly. By sensing
the "revs" (RPMs) of your engine, IntelliMute knows when you are at low
Secondary Icons
speed and automatically mutes alerts (except for strobe signals from
Intro
Operation
Customer
Warranty
emergency vehicles).
Assistance
Before IntelliMute will work, you must set an activation point for your engine's
revs (see page 14). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled
Notice
Secondary Icons
each time the power is turned on. An i will appear in the display when
IntelliMute is on. The factory setting is IntelliMute off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense
Notice
the engine's revs. In such cases, you can reduce unwanted audio alerts
by using Auto Mute and City mode when appropriate.
To Turn IntelliMute On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
Tone
go to IntelliMute.
Two beeps
One beep
IntelliMute On
Intelli
Mute
Auxiliary
Audio Jack
On
Warranty
Visual Display
IntelliMute On,
then i appears in the display
IntelliMute Off
IntelliMute Off
N W
i h
Intelli
Mute
Off
Nothing Comes Close to a Cobra
®
13
Advertisement
Table of Contents
