Download Print this page

Flex FX5351 Operator's Manual page 9

24v jobsite radio
Hide thumbs Also See for FX5351:

Advertisement

Available languages

Available languages

WARNING
product damage due to a short circuit, never
immerse your device, battery pack or
charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc. can
cause a short circuit.
WARNING
this product until the parts are replaced. Use
of this product with damaged or missing parts
could result in serious personal injury.
This jobsite radio must be used only with the battery packs and chargers listed below:
2.5Ah
5Ah
FLEX FX0111
FLEX FX0121
NOTICE: Please refer to the battery pack and charger manuals for detailed operating.
TO ATTACH/DETACH BATTERY PACK
CAUTION
pack.
a. To open the battery compartment (Fig. 2a):
Lift up the battery compartment latch first, then
open the battery compartment.
b. To attach the battery pack (Fig. 2b):
Align the raised rib on the battery pack with the
grooves in the unit, and then slide the battery
pack onto the unit.
NOTICE: When placing the battery pack
onto the unit, be sure that the raised rib
on the battery pack aligns with the groove
inside the unit and that the latches snap into
place properly. Improper attachment of the
battery pack can cause damage to internal
components.
c. To detach the battery pack (Fig. 2b):
Depress the battery-release button located
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and
remove it from the unit.
OPERATING INSTRUCTIONS
To reduce the risk of fire,
personal injury, and
If any parts are damaged
or missing, do not operate
Battery Pack
8Ah
FLEX FX0221
Always switch off the unit
before removing the battery
WARNING
accessories not recommended for use with
this device. Any such alteration or modification
is misuse and could result in a hazardous
condition leading to possible serious injury.
WARNING
serious personal injury, always remove the
battery pack from the device when
assembling parts.
12Ah
FLEX FX0231
Fig. 2a
Fig. 2b
Detach
-9-
Do not attempt to modify
this device or create
To prevent accidental
starting that could cause
Charger
FLEX FX0411
FLEX FX0421
2
1
Battery-release
button
Attach

Advertisement

loading