Digiview Data Display Brightness - Cobra XRS 9600 Operating Instructions Manual

Settings
Your Detector

DigiView Data Display Brightness

Your detector has a Bright display mode (for daytime driving) and three (3)
levels of Dim display modes (Dim for dusk driving, Dimmer for night driving
and Dark where no visual alerts will be displayed) to control the display's
brightness levels. The factory setting is Bright. The factory Dim mode
default setting is Dimmer.
Dark Indicator
.
Select/Dim Button
Press and release
To Change The Brightness To Dim
Press and release the
Tone
Select/Dim button once.
Two (2) beeps
Dim Display Dimmer Display
Dim Dimmer
NOTE
When you change to Dim mode, the unit will enter whichever
dim default mode is set at the time.
To Change The Brightness To Bright
Press and release the
Tone
Select/Dim button again.
One (1) beep
Bright Display
Bright
22 English
Visual Display
Dim, Dimmer or Dark
Dark Display
Dark
Visual Display
Bright
Settings
Your Detector
Setting Dim Default
You can set the default level for Dim mode (Dim, Dimmer or Dark)
either in Program mode or directly using the Select/Dim button.
Select/Dim Button
Press and hold
To Set The Display Dim Mode Default Directly Using The Set/Dim Button
Press and hold the
Tone
Select/Dim button
One (1) beep each time
the display cycles
Release the Select/Dim None
button to select the
current display as
default.
To Set The Display Dim Mode Default Using Program Mode
(See Page 7 For Instructions On Using Program Mode)
In Program mode,
Tone
go to Display Dim,
Two (2) beeps
Dimmer or Dark.
One (1) beep
One (1) beep
Dim
Press
and hold
Dark
Select/Dim
button
Dimmer
Visual Display
Cycles — see chart above
Dim, Dimmer or Dark
Visual Display
Dim
Dimmer
Dark
Nothing comes close to a Cobra ® 23