Advertisement
6.1.4.
Replace top section to the body and clip in place using side clips (fig.3).
6.1.5.
Connect hose to body and rotate counter-clockwise for a quarter of a turn to lock in place (fig.4).
6.1.6.
Assemble required tube and hose arrangement. (fig.1) (fig.4).
6.1.7.
Insert the battery, turn unit on.
6.1.8.
When you have completed vacuuming, press the switch to 'Off'.
6.2.
EMPTYING DUST BAG
6.2.1.
Turn off cleaner and remove battery (fig.8).
6.2.2.
Release side clips (fig.3) and lift off top assembly and filter assembly (fig.7).
6.2.3.
Carefully remove bag filter and empty contents into suitable receptacle.
6.2.4.
Reassemble filter and replace into cleaner body.
6.3.
WET VACUMMING
6.3.1.
Ensure the battery is removed from the unit.
6.3.2.
Loosen clips (fig.3) and remove the top section and filter assembly (fig.7).
6.3.3.
Slide foam filter over inlet (fig.6).
6.3.4.
Check that filter components are assembled correctly.
6.3.5.
Install top assembly and lock in place (fig.3).
6.3.6.
Insert the battery, turn unit on and commence cleaning.
6.3.7.
When you have completed vacuuming remove battery, unlatch top assembly and carefully empty contents of cleaner body into suitable
receptacle. DO NOT store with liquid in cleaner body.
6.4.
BLOWER OPERATION
6.4.1.
Ensure the battery is removed from the unit (fig.3).
6.4.2.
Remove hose assembly from suction port (fig.4).
6.4.3.
Attach hose assembly to air outlet on rear of top assembly (fig.7).
6.4.4.
Insert the battery, turn unit on and commence blowing.
6.4.5.
Aim hose assembly at area to be cleared.
fig.7
7. MAINTENANCE
7.1.
Ensure the battery is removed from the unit (fig.8).
7.2.
Disconnect the hose from the container.
7.3.
Undo the clasps and remove motor head from the container.
7.4.
Clear out any dirt or debris from the container and hose.
7.5.
Check the battery docking to make sure it has not received any damage.
7.6.
Handle the filters carefully when cleaning or installing.
7.7.
The filter assembly contains two washable parts:
filter core (fig.7)
foam filter (fig.6)
Wash the elements with cold or luke warm water. DO NOT use detergent.
Allow elements to air dry. DO NOT use heating equipment.
7.8. Check all elements for damage and replace if necessary.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
fig.8
www.sealey.co.uk
PC20SD20V
Issue 1 22/02/19
Advertisement
