XU1 XJS-101U Original Instructions

XU1 Power tools
iSC GmbH, Eschenstraße 6, D-94405 Landau, Germany
Telephone: GB: 0151 294 4488 / IRL: 1850 882711
XJS-101U

Electrical safety

This tool is double insulated; therefore no
earth wire is required.

Using an extension lead

Always use an approved extension lead suitable for
the power input of this tool. Before use, inspect the
extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always
unwind the lead completely. Use of an extension lead
not suitable for the power input of the tool or which is
electric shock.
The power supply for this product should be protected
by a residual current device (rated at 30mA or less).
A residual current device reduces the risk of electric
shock.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly

Description of symbols

Read instruction manual
Double insulated
V Volts
Alternating current
Hz Hertz
W Watts
Warning
0616
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Young children should be supervised to
ensure that they do not play with the appliance.