Sony Xperia 1 III Help Manual page 16

Tap [Assign volume keys] to use the volume key as a REC button or to activate the volume key for the Cinema
Pro app. When [Record] is selected, you can start recording by pressing the volume key even if a setting dialog is
open.
Tap [Rec button pos.] to change the position of the REC button and the Grab button.
3.
Project settings
Tap an orange parameter to adjust the resolution and frame rate of the entire project or video clips. The project
settings can only be changed before recording the first video clip.
4.
Clip settings – Parameters to adjust for each video clip.
Tap [Look] to adjust the ambience of the video clip.
Tap [FPS] to adjust the frame rate. Select [120fps] to record a video in slow motion.
Tap [Lens] to select a lens.
Tap [ISO] to adjust the ISO value. Tap [Auto] when it is orange to adjust to the appropriate ISO value
automatically.
Tap [WB] to adjust the white balance. You can use the sliders to adjust the white balance. Tap [Reset] to reset the
slider values for the selected setting.
To adjust the white balance according to a selected white area, select [Custom], tap [Set], hold your device so
that the white area fully covers the frame in the center, and then tap [Set] again.
If you select [Auto], you can set whether to lock the white balance settings.
Tap [Shutter] to adjust the shutter speed. Tap [Auto] when it is orange to adjust the appropriate shutter speed
automatically.
Tap [Focus] to adjust the focus. Tap [AF] or [MF] to switch the focus mode to auto or manual. When the focus
mode is set to manual, you can adjust the focus markers and speed of focus pulling by tapping
icon). When the focus mode is set to auto, you can specify the focus area by tapping the viewfinder.
5.
Tap to start or stop recording.
6.
Tap to capture the current frame as a still image.
7.
Tap to hide or show the frame lines, grid lines, and the Metered Manual.
8.
Level meter
Level meter helps you to measure the angle of the device and keep the picture horizontal. When your device senses
that it is level, the level meter turns green.
9.
Status indications
10.
Thumbnail
Tap a thumbnail to view a video clip or still image. Swipe left or right to view the previous or next video clip or still
image.
To return to the Cinema Pro home screen, swipe down on the screen or tap
Tap [All files] to view a video clip or still image that is not in the thumbnail view. While viewing a video clip or still
image, swipe left or right to view the previous or next one.
To return to the previous screen, swipe down on the screen or tap
You can capture a still image from the video by tapping
11.
Tap to change the audio level.
12.
Metered manual
The Metered Manual indicates underexposure/overexposure.
Related Topic
Combining clips and watching a film
(Back button).
(Edit video icon) while playing.
16
(Settings
(Back button).