Page 5
USB DRIVERS (AND FIRMWARE UPDATES) To download Windows Drivers, please see the separate manual. Any firmware updates will also be available from www.quad-hifi.co.uk...
Page 6
Standby Press to enable/disable standby 2 Display Press to alter the display ON/OFF 3 Number keys Select tracks 4 Store Press to store a track in Program mode 5 Info Press to display more information 6 Repeat Press to select a repeat mode 7 Volume+ Increase volume Play/Pause,...
Page 18
To use the USB input for the first time, the device requires the installation of the USB driver. Download the driver via www.quad-hifi.co.uk.
Page 19
Please follow the below instructions to connect your mobile device Select BT on your remote control or by short touch the SOURCE button on the front panel. Select Artera BT on your mobile device.
Page 21
To use the USB input for the first time, the device requires the installation of the USB driver. Follow the instructions of the setup program to install the driver. Complete the installation by clicking ‘Finish’.
The Output Gain feature apply an offset value (adjustable between -8dB to +8dB) to the volume control. The offset allow the volume control to be used in its optimal range (in terms of step resolution), accommodating the use of various types of loudspeakers with different sensitivity levels. AvDir(AUX2) AV Bypass mode for AUX2 , the gain of the AUX2 audio path is set to fixed level output (0dB).