Removing & Installing Body Components
Rear Seat
Front prongs
Front stays
70
Rear seat
Seat lock
Ignition
key
Rear Seat
u
#
Removal
Insert the ignition key into the seat lock.
1.
Turn it clockwise, then pull the rear seat
2.
up and back.
#
Installation
Insert the front prongs into the front stays
1.
on the frame.
Push and down on the rear of the rear
2.
seat until it locks in place.
Make sure that the seat is locked
u
securely in position by pulling it up
lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the rear seat.