Service Position - Panasonic TX-36PG50D Service Manual

HOW TO MOVE THE CHASSIS INTO SERVICE POSITION
1. Remove the 3 screws (B) and (C) shown in Fig.5. / Fig.6., and remove the 2 speakers from the cabinet.
2. Affix the support strap supplied in the service pack (TZS1EK002) using a back cover screw, into the top right-hand
cabinet rib (A) shown in Fig.4.
3. Hold and lift the rear of the chassis and gently pull toward you, as shown in Fig.4.
4. Release the respective wiring clips and rotate the chassis vertically through 90°, anti-clockwise.
5. Locate the base of the chassis frame into location (D), shown in Fig.7. / Fig.9.
6. Clip the chassis frame onto the support strap, shown in Fig.7. / Fig.8.
7. After servicing replace the speakers, and ensure all wiring is returned to it's original position before returning the recei ver
to the customer.
Fig.4.
(D)
Fig.7.
(A)
4
Fig.5.
Fig.6.
Fig.8.
Fig.9.
(B)
(C)