Advertisement
4. Enter the IP address for your DL-303 in the address bar of a web browser. (The
IP address could be obtained by going to the Settings >> About menu from the
touch screen.)
5. Type the Login password, and click the Submit button.
(The default Login password is Admin, case sensitive.)
6. The first page displayed is Home, it shows the based configuration of the DL-303
module and the real-time data as below. In the Sensor Readings field is the real-
time data of CO/CO2 concentration, temperature, humidity and dew point, the
minimum value (Low Latched) and maximum value (High Latched) logged.
Clicking on the Clear Low Latched button and the Clear High Latched button can
reset the latched data to current value and latch new minimum or maximum
value.
DL-303 -Remote CO, CO2, Temperature, Humidity, Dew Point Data Logger
ICP DAS USA, Inc. |
www.icpdas-usa.com
tech@icpdas-usa.com
Contact us:
| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
/
sales@icpdas-usa.com
- QuickStart (Jun/2016)
5
Advertisement
