Table of Contents
Advertisement
14
SymNet1
User Manual
WebServer overview
The SymNet1 has an integrated WebServer interface. The WebServer provides the user the means to remotely
configure, upgrade, and view information about the SymNet1. The default IP address from the factory is
192.138.1.12. To get the SymNet1 to stream video, at a minimum the Streaming settings must be configured.
To access the web interface, do the following:
1. Launch Internet Explorer (version 5.5 or later) on any local Internet connected PC or laptop.
2. Type in the unit's IP address (xxx.xxx.xxx.xxx) or hostname (see network settings page) in the address
field and press Enter. The Enter network password box displays.
3. Enter the correct username and password in their respective fields (the default username and password
is admin). Click OK.
4. The SymNet1 Home page appears (Figure 8).
Figure 8. SymNet1 home page
The Home page provides the following links:
•
SymBrowser (see
•
Configure (see
•
Info (see
•
Upgrade (see
SymBrowser page
Configuration page
Info page
on page 33)
Upgrade page
on page 36)
on page 15)
on page 16)
Advertisement
Table of Contents
