Displays2go PPS100IN Instruction Manual

PORTABLE PROJECTION SCREEN
INSTRUCTION MANUAL
SKU: PPS100IN

Warnings

■ Improper use and care may cause serious injury and/or damage!
■ This product must be installed and placed on a flat and stable ground.
■ Please read the following as any damage to the screen surface will impact the image's quality:
1. Do not touch the screen with your hand or finger with excessive force.
2. Do not write or draw on the screen surface.
3. Do not use any sharp object to touch the screen surface, as it may scratch or tear the fabric.
4. Do not use any detergent or cleaning products to clean the screen surface. Clean with a soft cloth and
lukewarm water.
■ Retract the screen after every use.
■ Do not pull two sides of the screen fabric by hands. Do not fold the screen fabric.
■ To prevent damage, always follow the instructions for the operation and maintenance of the screen.
A
Ignoring the safety warnings may lead
to injuries or damaging the product.
0
Retract the screen after every use.
Leave it hanging for a long period may
cause screen fabric to be loose.
Do not hang other objects on the screen
as it may cause the screen to fall down.
Product specifications are subject to change.
If you have any further questions regarding our products, please visit us at www.displays2go.com or contact
D2g customer service at 844-221-3388.
Scan QR code to visit
the product page:
0
The screen should be securely installed to
avoid any accidents or damages.
Do not replace the screen frame with unknown
parts. Do not modify device as it may cause
personal injury or property damage.
Check the frame and make sure it's securely
con n ected before every use. Loose parts may
cause the screen to fall down.
Connect (3) A tubes with straight connectors to assemble the top cross bar.
�
�
LEFT SIDE
Connect (3) B tubes with straight connectors to assemble left & right posts.
Insert the crossbar through the pocket at the top of the screen fabric.
h
h
RIGHT SIDE
2