Advertisement
【P1-3】
PB8-025
PB8-094
【P2-1】
This side inside 此面朝内
1.55
Note : Inject silicone oil #950 into the bottom of fork(PB8-040-C) ,coated the screw glue
first when screwing down the round head screw(M3x10) and the grains(M3x4).
提 示：油压脚(PB8-040-C) 灌入#950号避震油；锁圆头螺丝（M3x10）和机米（M3x4)时需先
涂上螺丝胶。
M2
P/M2x6
PB8-085
PB8-088
PB8-116
PB8-083
BL/ Ø 10x Ø 5x4
Note : Please coated the screw glue first
screwing down the flat head screw(M2x6) .
提 示：锁平头螺丝（M2x6）时需先涂上螺丝胶。
Note : Please grease the planet gear first when install the gyro pocket. Pls apply the rim and the tire with CA glue
after finishing assembly. When change the tire , please check the bearing have any injured and apply the
grear silicone oil.
提 示 : 安装陀螺仪时请在行星齿上添加润滑油；完成陀螺仪安装后请将陀螺仪上下盖与轮胎用快干胶固定；如需更换
轮胎请检查轴承是否损坏 , 同时再添加润滑油。
R/M3x10
PB8-040
B/M2x5
JM/M3x4
PB8-113
PB8-114
PB8-109
PB8-087
PB8-111-1
PB8-087
JM/M3x2
BL/ Ø 8x Ø 5x2.5
BL/ Ø 10x Ø 5x4
PB8-091
BL/ Ø 10x Ø 5x4
when
PB8-005
R/M3x10
PB8-048
PB8-040
JM/M3x4
PB-087 Spacer 垫片 Ø5.1xØ6.5x0.8
PB-088 Spacer 垫片 Ø5.1xØ6.5x2.3
PB-091 Spacer 垫片 Ø5.1xØ6.5x1.8
PB8-086
BL(F)/ Ø 9x Ø 5x3
PB8-084
B/M2x8
P/M2x10
PB8-035
PB8-034
PB8-040-A
PB8-040-B
PB8-040-M
PB8-040-H
PB8-040-D
PB8-040-F
PB8-040-I
PB8-040-F
PB8-040-I
PB8-040-E
PB8-040-L
PB8-040-G
B-M1.6x5
PB8-040-K
PB8-040-C
Advertisement
