Advertisement
Scan for full manual
Step 1: Check what's in the package
ECU-Z100
KT-107Z/KT-107ZRB
(with restricted BW, up to 5.35GHz)
On-wall mount unit
Panel Mount plate
Step 2: Get to know your KIT-Z100
ECU-Z100
#
Feature
1
Power Button
2
USB 2.0 Connector
3
Wi-Fi Antenna Port (2)
4
DC IN 19V Connector
5
HDMI OUT Connector
6
DP OUT Connector
7
USB 3.0 Connectors
8
USB 2.0 Connectors
9
LAN RJ-45 Connector
10
REMOTE 2-pin Terminal Block Connector
11
AUDIO
MIC IN 3.5mm Mini Jack
12
LINE OUT 3.5mm Mini Jack
KIT-Z100 Quick Start
KIT-Z100 Quick Start Guide
This guide helps you install and use your
Go to
www.kramerav.com/downloads/KIT-Z100
upgrades are available.
Function
For turning the unit on and off.
For upgrading firmware or connecting a USB device.
Connect the Wi-Fi antennas for collaborating via the built-in Wi-Fi.
Connect to the 19V DC power adapter.
Connect to an HDMI display.
Connect to a DisplayPort display.
Connect to up to 2 USB devices.
Connect to up to 2 USB devices.
Connect a Local Area Network (LAN) cable.
Connect to a toggle switch to remotely turn the device on and off.
Connect to a microphone.
Connect to an unbalanced stereo audio acceptor.
KIT-Z100
for the first time.
to download the latest user manual and check if firmware
1 19V DC power adapter and cord
1 5.2V power adapter and cord
1 C-USB/Micro B cable
1 right-angle OTG USB cable
P/N: 2 9 0 0 - 3 0 1 4 2 0 QS
1 Quick start guide
Tabletop mount
Installation screws
Rev: 1
Advertisement
Table of Contents
Related Manuals for Kramer KIT-Z100
Summary of Contents for Kramer KIT-Z100
- Page 1 Tabletop mount On-wall mount unit 1 C-USB/Micro B cable Installation screws Panel Mount plate 1 right-angle OTG USB cable Step 2: Get to know your KIT-Z100 ECU-Z100 Feature Function Power Button For turning the unit on and off. USB 2.0 Connector For upgrading firmware or connecting a USB device.
- Page 2 Flat Cable Connector For connecting to the on-wall mount unit. Connecting Holes For connecting to the tabletop mount or the panel mount plate. To prevent potential damage to the KT-107Z/KT-107ZRB, use only Kramer supplied screws and mounts. Step 3: Mount ECU-Z100 Install...
- Page 3 Mounting on the wall: Before mounting KIT-Z100 on a wall, install an in-wall junction box (recommended boxes are listed in the user manual) Attach the on-wall mount unit to the installed junction box (top side up see indication arrows on unit).
- Page 4 Step 5: Connect inputs and outputs Always switch OFF the power on each device before connecting it to your KIT-Z100. To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/KIT-Z100. Using third-party cables may cause damage! Microphone and speakers can be connected to...
Need help?
Do you have a question about the KIT-Z100 and is the answer not in the manual?
Questions and answers