Materials; Hardware; Specific Items; Special Items - Planet ES-10024B-1 Maintenance Manual

6.11

Materials

This section presents the current materials available for maintenance. Items are available through an HET autho-
rized distributor and are the only parts available at this time. Some parts such as OEM pulleys alternator belt, and
drive coupling may only be available from aircraft/engine OEM.
A. Hardware
(1) One (1) each, Nut, Output Shaft, HET P/N GBM-21B. Replace when removed. (ES-10024B only)
(2) One (1) each, Washer, Locking, (Output Shaft) HET P/N 40523-4. Replace when removed. (ES-10024B
only)
(3) One (1) each, Nut, Output Shaft, HET P/N 8X-4075. Replace when removed. (gear driven only)
(4) As required, Nut, AUX terminal, HET P/N 8X-0173.
(5) As required, Lockwasher, AUX terminal, HET P/N 12X-0196. Replace when removed.
(6) As required, Nut, Output terminal, HET P/N 8X-1063.
(7) As required, Lockwasher, Output terminal, HET P/N 12X-0199. Replace when removed.
(8) As required, Cupped Nut, Ground terminal, HET P/N 40298.
(9) As required, Nut, Field terminal, HET P/N 8X-0140.
(10) (10) As required, Lockwasher, Field terminal, HET P/N 12X-0194. Replace when removed.
B. Specific Items
(1) One (1) each, Pulley, 10 Groove, HET P/N 40840. (ES-10024B-5)
(2) One (1) each, Pulley, 6 Groove, HET P/N 40485. (ES-10024B-4)
(3) One (1) each, Pulley, 6 Groove, HET P/N 40483. (ES-10024B-3)
(4) One (1) each, Pulley, V Groove, HET P/N 40482. (ES-10024B-2)
C. Special Items
(1) One (1) each, "O" Ring, HET P/N 32B70247A01. Replace when removed. (N/A ES-10024B)
(2) One (1) each, Woodruff Key, (Output Shaft) HET P/N X-3832 for ES-10024B only, X-0260 for direct drive
ES-10024, ES-6024D, ALV-9610. Replace when removed.
(3) One (1) each, Spacer, (Output Shaft) HET P/N ALD-0021. (ES-10024B only)
(4) One (1) each, Spacer, (Output Shaft) HET P/N 41151.
(5) One (1) each, Plate, Fan, HET P/N PU-0604A. (ES-10024B only)
(6) One (1) each, Fan, Bi-Directional, HET P/N PU-605A. (ES-10024B only)
(7) Two (2) each, Brush Ass'y, HET P/N ALE-13A.
(8) As required, Screw, Brush Holder HET P/N 03C44209B15.
(9) One (1) each, Brush Holder Ass'y, HET P/N ALU-3045BS for ES-10024B & ALV-9610 (optional)
(Includes holder, brushes, & brush retaining wire.)
(10) One (1) each, Brush Holder Ass'y, HET P/N ALE-3045BS for ES-6024D & ES-10024. (optional)
(11) As required, Safe-T-Cable™, HET P/N RX-1961. (or .032 stainless steel safety wire.)
24-30-01
Page: 6-12
© 2021 - Hartzell Engine Technologies - All rights reserved
Aircraft Alternator
Maintenance Manual
ES1031
Rev. A: 11 Aug. 2021