Leica MATS User Manual page 17

Control of the
Temperature
Temperature Indicator
Duration
– method: The temperature control is based on the
PID controller with solid state relay
– achieved accuracy: T (actual temperature) in the middle of
the heating stage lies within a range of [t > T > t-1] °C,
whereby t represents the set temperature (under the
condition that the set value t = 37 °C)
– step: 0.1 °C
– setting method: with Up and Down key
– setting range: room temperature to 50 °C
– achievable temperature accuracy: ±0.3 °C
(with indicator temperature)
– sensor: thermocouple
– connection to heating stage: 4-pole connector
(cable length: 1000 mm)
– instructions method: 7-segment digital display and
single-lighting indicator
– step: 0.1 °C
– indicating accuracy: ±0.5%
50 °C within 10 minutes
Leica MATS – Technical Data 17