Technical Data - Leica MATS User Manual

Technical Data

Power supply
Operating Environ-
mental Conditions
Power cable
16
Leica thermocontrol system MATS
100-240 V ±10 % AC, 50/60 Hz, 0.68 A, protection class I
– indoor use only
– temperature: 5 °C to 40 °C
– maximum relative humidity: 35% to 80%
– altitude: up to 2000 m max.
– environmental conditions: installation category II according
to IEC 664, degree of pollution 2
For mains supplies with 100 to 120 V, use only the following
power cables:
– UL listed, detachable cord set, 3 conductor grounding type
SVT No.18 AWG rated at 125 V, 7 A minimum
– if an extension cord is used, use only a power supply cable
with PE (protective earth) connector
For mains supplies with 220 V to 240 V:
– inside the EU, use only 3-wire power cable, plug and
connector
– according to EU/EN standards
– Class 1 equipment should be connected to PE
(protective earth) terminal
– if an extension cord is used, use only a power supply cable
with PE (protective earth) connector
Leica MATS – Technical Data