Huawei Q2 Product Description page 5

HUAWEI WiFi Q2
Product Description
No.
1
2
3
4
5
Issue 01 (2019-04-25)
Button/ Port
H button
NOTE
This article uses the H button
to represent the
button.
Power port
WAN port
LAN ports
Reset button
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The indicator will flash slowly when the router
discovers a device that supports HUAWEI HiLink.
You can press the H button to connect the device to
the router's Wi-Fi.
Devices that support HUAWEI HiLink include: HUAWEI
routers, HUAWEI mobile phones (EMUI 5.1 or later), etc.
Connect to power supply.
Avoid using power strips. Some power strips have EMI filters
that may cause a Secondary router to be unable to connect to
the network.
Connect to the Internet (e.g., a fiber optic modem or
broadband modem)
Connect to the network devices like computer.
Power on the router and wait for a moment (until the
router completes the startup process). Use a needle
or pin to press the Reset button on the router for
approximately two seconds and release it until the
indicator light goes out. Once the router reboots, its
factory settings are restored.
Overview
4