Table of Contents
Advertisement
Available languages
Available languages
Utilice el modo horizontal para ver de cerca las curvas del ecualizador.
Updating the Firmware for Shure AONIC products
Take advantage of additional features and design enhancements by updating the firmware on your AONIC product. To check
for firmware updates, connect the AONIC product to a device running the ShurePlus PLAY app, available for
Follow these steps for a successful firmware update
1.
Enable Airplane mode on your mobile device.
2.
Turn on Bluetooth and pair the AONIC product to your device.
Attention: Android users, check settings to ensure that both adapters are connected to your device.
3.
Open the ShurePlus PLAY app and select the Device tab.
◦
IMPORTANT: Ensure that both earphones or adapters are paired with the device and in close range (for applicable
products).
◦
If both earphones or adapters do not automatically connect, tap the music tab and then tap back into the device tab.
4.
When an update is available, a green dot will appear next to Firmware Update in the device settings menu.
5.
Tap the caret icon and follow the onscreen step-by-step instructions. The progress bar displays progress percentage for
both adapters; it is a single process.
Shure Incorporated
Android
and iOS.
17/27
Advertisement
Table of Contents
