Shure Incorporated Table of Contents Accessories RMCE-TW1 Shure True Wireless Secure Fit Adapters Furnished Accessories Replacement Parts AONIC 215 True Wireless Sound Isolating™ Earphones 3 The best sound starts with a good fit Specifications To keep them sounding their best...
To keep them sounding their best... • Clean regularly to remove debris and deposits. • Contact Shure Service and Repair to replace damaged product. Simply detach and return the broken earpiece for easy re placement. ® Bluetooth Pairing Earphones automatically enter pairing mode when you first power them on or when they have not been previously paired with this audio source.
Press and hold button on the right adapter. Continue to hold after you hear “Power on”. When you hear "Bluetooth pairing mode" (about 5 seconds), release the button. From your audio source, select "Shure TW1." After a pause (about 4 seconds) you will hear “Connected”.
Shure Incorporated Visit http://www.shure.com/earphones for replacement parts and important instructions on cleaning and maintenance. Button Using The Buttons Press and hold the button on the right adapter until you hear "Power on". Power on Press and hold the button on the left adapter until you hear "Power on".
The ShurePlus PLAY Mobile Listening App is a high-resolution music player with advanced EQ controls. Play uncompressed audio files with your iOS or Android mobile device using the music tab. Use built-in Shure EQ presets to customize the sound, or create your own EQ presets in the settings tab. Unlock environment mode and ANC features by connecting to Shure wire...
Shure Incorporated Environment mode Environment mode allows you to accentuate the ambient noise around you. This is especially useful when you want to listen to music or are on a phone call, yet you still want to be aware of the sounds around you.
Shure Incorporated Duplicate a Preset Select one of the five preset modes and tap Duplicate. Tap the More Options 3 dots. Tap Edit EQ Preset. There are three ways to adjust your equalizer. Tap the values to type in a specific number. Tap the - or + to adjust in larger increments.
Shure Incorporated Use landscape for a close-up view of your EQ curves. Preset Modes Use presets to quickly access commonly used listening scenarios. Five selectable 4-band presets optimize settings for gain, equalization, and compression. Play a song and find the preset that you think suits the song best. Then adjust levels as need...
To avoid this situation: • When pairing: Begin pairing mode with the right adapter. Select "Shure TW1" in the Bluetooth device list. Power on the left adapter. • Already paired: power them both on at the same time Reset paired devices list You may find it necessary to reset the True Wireless adapters.
Shure Incorporated Charging the adapters Insert the adapters into the charging case to charge. The LED is red while charging. When fully charged, the LED turns green. Use the supplied USB-C cable to recharge the charging case. Warning: Before charging, ensure that the adapters and case are at room temperature, between 10 to 45°C (50 to 113°F).
Shure Incorporated Low battery Slow blinking red Charging case LEDs Adapters charging Adapter charge complete Green, then LED turns off On bottom of charging case, white LEDs blinking until fully Charging case charging charged, then all LEDs remain on On bottom of charging case,...
Page 13
Shure Incorporated Antenna Type Integral antenna Antenna Gain -4.32 dBi (Left), -2.73 dBi (Right ) Supported Codecs ™ Qualcomm aptX , SBC, AAC Working Range 10 m Operating Temperature 0°C to 45°C (32°F to 113°F) Charging Temperature Range 0°C to 45°C (32°F to 113°F) Storage Temperature -10°C to 35°C (14°F to 95°F)
Shure Incorporated SAFETY PRECAUTIONS Before using this product, please read and save the enclosed warnings and safety instructions. WARNING FOR ALL EARPHONES! Use, clean, and maintain earphones according to manufacturer’s instructions. SAFETY PRECAUTIONS The possible results of incorrect use are marked by one of the two symbols—"WARNING" and "CAUTION"—depending on the imminence of the danger and the severity of the damage.
• Risk of fire or explosion if the battery is replaced by an incorrect type Note: Battery replacement to be performed only by Shure authorized service personnel. Information to the user This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference.
Page 16
Shure Incorporated Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa...
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Hereby, Shure Incorporated declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.shure.com/europe/compliance...
At its sole option, Shure will repair or replace the defective product and promptly return it to you. In order for this warranty to be valid, the consumer must, at the time the product is returned, provide proof of purchase in the form of the original purchase re...
At its sole option, Shure will repair or replace the defective product and promptly return it to you. In order for this warranty to be valid, the consumer must, at the time the product is returned, provide proof of purchase in the form of the original purchase re...
Les personnes qui utilisent des écouteurs régulièrement pendant de longues périodes trouvent souvent que des inserts moulés sur mesure offrent le meilleur confort et la meilleure isolation acoustique. Grâce à un partenariat entre Shure Incorpo rated et Sensaphonics Hearing Conservation, des inserts sur mesure sont disponibles pour les écouteurs Sound Isolating de Shure.