aidapt VR161G Fixing And Maintenance Instructions page 3

Essex height adjustable commode chair (flat packed)

Hide thumbs Also See for VR161G:

ASSEMBLY INSTRUCTIONS

1. Ensure the seat frame is on a flat surface, remove 'E'-clips from

the back of the seat frame, and slot padded back rest into the

frame, insert e-clips securing the back rest. (see fig.1)

2. Remove the top e-clip from seat leg, insert the leg onto the

seat frame ensuring then secure with e clip (see fig. 2) Follow

the above procedure for the 3 remaining legs ensuring e-clips

are fully inserted

3. Ensure commode pail is secure within the frame of the chair and

place seat cover on top of the toilet lid.

HEIGHT ADJUSTMENT

Remove the e-clip from the extension leg and extend all legs

evenly to the desired height ensuring you do not exceed the last

punched hole of the extension leg. (see fig. 3)

Once you have achieved the height you require, re-install the

e-clip ensuring that it has passed through the extension leg and is

secured neatly and snugly around the commode leg. (see fig.4)

Make sure that all legs are sitting evenly onto the floor, never

Product Frame

extend legs in a manner that the commode is slanting. This will

compromise the safety of the user.

Product Frame

E-clip

Extension Leg

Punched Holes

E-clip

Extension Leg

Fixing and Maintenance Instructions

Punched Holes

fig. 1

fig. 3

fig. 1

fig. 2

Product Frame

fig. 4

E-clip passed

through punched

holes in product

frame and

extension leg

Extension Leg