Advertisement
Electrical connection
Assignment of connection cable
Ball valve open:
Supply lines:
– black = phase (230 V)
– blue = neutral wire
Ball valve closed:
Supply lines:
– black = phase (230 V)
– blue = neutral wire
Connection description
For using the valve, the blue and the black supply lines must be connected to the mains voltage, here
connect the black line/cable with the phase and the blue line/cable with the neutral wire. Ball valve po-
sition is determined via the red control line. If the supply line is connected to the mains voltage, the ball
valve changes the position from closed to open, or in the case of the DQ320 valve, it changes the pos-
ition from "AB-A" to "AB–B."
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Control line:
– red = zero potential
Control line:
– red = phase (230 V)
Item 50650, 50651, 50654
Page 5
11
2020-1
Advertisement
