Page 2
To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents.
TABLE OF CONTENTS SAFETY SECTION ......................1-1 General Safety Instructions and Practices ......................1-2 Equipment Operation Safety Instructions and Practices ..................1-4 Connecting or Disconnecting Implement Safety Instructions and Practices ............1-6 Maintenance and Service Safety Instructions and Practices ................1-7 Storage and Parking Safety Instructions and Practices ..................
Page 4
TRANSPORTING THE TRACTOR AND IMPLEMENT ................... 4-16 Tractor Hook-Up for Transporting ........................4-17 DRIVING THE TRACTOR AND IMPLEMENT ....................4-18 Transporting on Public Roadways ........................4-19 Hauling the Tractor and Implement ........................4-21 TROUBLESHOOTING GUIDE ........................4-22 MAINTENANCE SECTION ....................5-1 LUBRICATION INFORMATION ......................... 5-2 Lubrication Points ..............................
Page 24
NOTE: Warranties are honored only if completed “Owner Registration and Warranty” forms are received by Alamo Group within thirty days of delivery of the implement. 3. Record the Rake Model and Serial Numbers on the Warranty page at the front of the Operator’s Manual.
Page 61
TO THE OWNER/OPERATOR/DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety...
Need help?
Do you have a question about the Bush Hog PA8 and is the answer not in the manual?
Questions and answers