Replacing the horizontal lift brake
Fig. 20
2
Fig. 21
•
Push the horizontal lift until the cable bundle is in the position shown in Fig. 20.
•
Leave the C-arm in the horizontal position (Fig.1). This position is used to determine the
end stop (1/Fig 22).
•
Reinstall the spring ring (1/Fig.21).
•
Reattach the stop (2/Fig.21) with the screw.
•
Reinstall the stop wheel (1/Fig.22).
•
Reinstall the spring ring (2/Fig.22).
Siemens AG
Medical Engineering
1
Fig. 22
SPR2-230.076.01
Rev. 01
02/99
2
Page 11 of 16
SIREMOBIL Iso-C
TD SD 24
11
1