Whirlpool LSA1100 User Manual page 7

Excessive Weight Hazard
Use two or more people to move and
install washer.
Failure to do so can result in back or other
injury.
1. Move Machine to the final location
move washer to within 1.5 m of its final
location; it must be in a fully upright position.
Note:
To avoid floor damage, set the washer onto a
cushion before moving it and make sure lid is
taped shut.
2. tilt the Machine
tilt/ tip the machine sideways. ensure that
place the machine is placed over a carton/
foam support on the floor to prevent the
damage to the floor or to the product. it is
recommended to use the inner foam cushion
for support before tilting the machine.
3. ReMove the shipping bRacket
Screw
Shipping bracket
Whirlpool | User Manual
remove the shipping bracket from bottom,
by removing two screws using a Phillips (star)
screw driver.
IMPORTANT Failing to remove the shipping
bracket can result in excessive noise during
spin/rinse operation.
• Fix the rat mesh provided along with the
product to the bottom of the machine with
screws.
• Assemble the foots (4nos) to the corresponding
provisions at the bottom of the machine.
4. set the Machine upRight
• Set the machine upright and remove all
packing supports from inside of the basket.
5. attach dRain hose to dRain poRt
1
The drain hose
demonstrated by the service engineer when
he comes to install your washing machine.
However, the steps for the connections are
give below for your reference.
Steps to follow
Insert the drain hose to the drain outlet
area of the machine.
A) Press the hose clamp.
B) While Pressing, push the clamp and the
hose simultaneously towards the body.
C) release the hose clamp after insertion.
2
connection will be
7