Advertisement
8. PRECAUTIONS
1. Installation must be performed by a qualified technician in accordance with the
requirements of national electrical codes and procedures.
2. There must be a RCCB and MCB in the installation. Make sure the ground wire is
properly installed.
3. Do not use water at a very high temperature. Put the cold water first, then the hot
water. Do not activate the appliance until the water level is higher than the level of the
jets.
4. The nominal voltage of this device is 220V. Do not use the device if the voltage is
higher than 235V or lower than 190V.
5. Do not take too long baths. Recommended time: less than 30 minutes.
6. In the event of occasional system shutdown, restart the device.
7. If the power cable is damaged, it must be replaced by the manufacturer, or by
qualified persons in order to avoid unnecessary risks.
8. This manual is enclosed with the product. Before installation, please read it
carefully. Installation and use must be in accordance with this manual to avoid damage
or accidents.
Advertisement
